Kìm kẹp dòng Kyoritsu Model 8126
MODEL 8004
-
Discontinued products
Adaptor designed to increase the measuring capability of your clamp meters.
With the use of the multi-tran you can not only extend current ranges but also clamp on a conductor of larger diameter.
HOW TO USE
Clamp your instrument around the pick-up coil of the multi-tran.
Then, clamp the transformer jaws of the multi-tran on the conductor, as shown below.
Multiply the reading of your clamp meter by 10 to obtain the current value measured.
|
Measuring Range |
0 - 1000A AC |
|
Ratio/Range |
10 : 1 (input to output) |
|
Accuracy |
±3% of full scale |
|
Allowable |
0 - 1000A (continuous), 1000 - 1500A (10 minutes max.) |
|
Measurement Time |
3000A (30 seconds max.) |
|
Conductor Size |
Ø60mm max. (50 × 75mm) |
|
Frequency Response |
50Hz/60Hz |
|
Withstand Voltage |
3000V AC for 1 minute |
|
Dimensions |
240(L) × 85(W) × 30(D)mm
45(L) × 40(W) × 10(D)mm Output coil |
|
Weight |
490g approx. |
|
Accessories |
9022(Carrying Case) |
|
For use with |
2002PA, 2002R, 2004(AC only), 2006, 2007A(AC only), |
|
following models * |
2009A(AC only), 2017, 2027, 2031, 2033(AC only), 2037(AC only),
2040(AC only), 2046R(AC only), 2055(AC only), 2056R(AC only),
2412, 2417, 2431, 2432, 2433, 2433R, 2434, 2608A, 2805,
8113(AC only) |
* These Multi-Trans can not be used for leakage current measurement.
Multi-Trans
MODEL 8004
-
Discontinued products
Adaptor designed to increase the measuring capability of your clamp meters.
With the use of the multi-tran you can not only extend current ranges but also clamp on a conductor of larger diameter.
HOW TO USE
Clamp your instrument around the pick-up coil of the multi-tran.
Then, clamp the transformer jaws of the multi-tran on the conductor, as shown below.
Multiply the reading of your clamp meter by 10 to obtain the current value measured.
|
Measuring Range |
0 - 1000A AC |
|
Ratio/Range |
10 : 1 (input to output) |
|
Accuracy |
±3% of full scale |
|
Allowable |
0 - 1000A (continuous), 1000 - 1500A (10 minutes max.) |
|
Measurement Time |
3000A (30 seconds max.) |
|
Conductor Size |
Ø60mm max. (50 × 75mm) |
|
Frequency Response |
50Hz/60Hz |
|
Withstand Voltage |
3000V AC for 1 minute |
|
Dimensions |
240(L) × 85(W) × 30(D)mm
45(L) × 40(W) × 10(D)mm Output coil |
|
Weight |
490g approx. |
|
Accessories |
9022(Carrying Case) |
|
For use with |
2002PA, 2002R, 2004(AC only), 2006, 2007A(AC only), |
|
following models * |
2009A(AC only), 2017, 2027, 2031, 2033(AC only), 2037(AC only),
2040(AC only), 2046R(AC only), 2055(AC only), 2056R(AC only),
2412, 2417, 2431, 2432, 2433, 2433R, 2434, 2608A, 2805,
8113(AC only) |
* These Multi-Trans can not be used for leakage current measurement.